供应免漆门异形压机E--沈阳展鸿图机械

功能介绍
可进行各种各种高档PVC进行高难度加工,可制作优质高亮光PVC工作。
可将各种实木薄片贴覆在较深的门芯R弧中。
General Introduction
The machine can be used to process all kinds of high quality PVC and high polished PVC piece. 
It can also wrap all kinds of wooden slice to the deep door core arc.
设备特性
1、本机机架采用六张30mm厚整块钢板加工而成,强度大,无焊接变形。
2、10.4英寸进口彩色触摸屏,中国台湾“台达”PLC可编程控制器。
3、铝合金工作台,硅橡胶密封条。抗变形、耐老化、导热迅速。
4、四种操作模式,可满足各种工艺的要求。
Features
1、The machine frame is made up of 6 whole pieces of armor plates excavated and processed which are 30mm.
2、10.4 inches imported colorful touching dominating screen. Taiwan “Taida” PIC program controller.
3、Aluminum alloy working station, silicon rubber airproof strip. Resist the distortion, hard to age, and quick to transmit heat.
4、There are four kinds operation type which could meet all kinds of technical demands. 
技术参数(Technical Specifications)
外形尺寸（Exterior size）：9930mm*2330mm*2230mm
工作台尺（Working plate size）:2550mm*1270mm(内径inner size)
较大加工高度(Maximum height of the work piece)：50mm
额定工作压力(Raying working pressure)：正压(Positive pressure)≤0.8Mpa负压(Negative pressure)≥-0.095Mpa
总功率(General power)：50.2kW
实际耗电(Actual power consumption)：约(about)16kW
整机重量(General power)：16T